TCL 脚本
本栏目用于收集数字 IC / EDA 流程里常用的 Tcl 片段与小工具脚本,方便检索复用。
新增脚本时,建议在 docs/tcl/ 下新建一页 Markdown,写清:场景、工具环境、用法,并把脚本放在代码块中。
脚本列表
- 脚本页模板
- 示例:统计 cell 数量
- PT DMSA Hold ECO 脚本
- Innovus CCOpt CTS 脚本
- set_ccopt_property target_skew
- PT 查看功耗
- Innovus 估算 Chip 面积
- Innovus 01 Import Design
- Innovus 02 Floorplan
- Innovus 03 Powerplan
- Power Switch Stapling Stripe(power_stape_pso)
- M10 Power Stripe(addStripe M10)
- globalNetConnect 覆盖 VDD 逻辑连接
- PowerVia 打上与删除(dual_rail_via1)
- VIA1 插入(PG VIA1 Insertion)
- PT 入口:source run_pt.tcl
- Innovus PG Special(Memory M5)
- 选中 Macro 并导出 DEF
- Innovus 复制走线并改层改线宽
- Via Pillar 下方不摆放特殊 cell
- Innovus Place Padding(cell / instance / module)
- dbGet 里 ref 名与 instance 名的区别
- Path Group 分组与权重(group_path / setPathGroupOptions)
- Create Region 区域约束(createInstGroup / createRegion)
- 统计 VT Cell 比例(RVT / LVT)
- high_opt.tcl(High Effort Opt + LVT)
- PowerAware Opt(setDesignMode / setOptMode)
- ecoDeleteRepeater(删除 Buffer / Repeater)
- Clock Tree Debug 高频命令
- CTS 涉及脚本
- hilitePath_1 高亮 Timing Path
- insert_port_buffer(端口插 Buffer)
- Place 后检查 Input Floating
- 检查 Always-on Isolation 前是否插 Buf
- 检查 VT Cell 数量与比例(BWP16P90)
- 报告 Path 逻辑深度
- report_clocks 查看 Design 频率